Netgear router is one of the best WiFi devices, letting internet lovers to work seamlessly on their connected devices. Though Netgear router is a smart device, some users reported that they got stuck when searching for new and latest firmware updates. If you are also screwed by the same issue, don’t sweat over it. Here’s how to fix the Netgear router firmware update stuck issue in no time. Let’s get the ball rolling!
Before going with the troubleshooting tips to fix the issue, let’s have a quick glance at its causes first.
Causes Behind Getting Netgear Router Firmware Update Stuck Issue
When you perform Netgear router firmware update process, there are a couple of points that you must keep in mind. You might bump in the spot of hassle due to a number of reasons highlighted below:
- The device (computer or laptop) you are using is not connected to your router’s WiFi.
- Your device is not having enough space to download the firmware file.
- The Ethernet cable you have used to connect your Netgear router and modem is damaged or the connection is not successfully established.
- You have entered admin 192.168.1.1 IP with typos or in the search bar of the internet browser.
- Selection of wrong firmware version for your router model.
- You are following the incorrect Netgear router firmware update steps.
Well, there are various methods to perform the Netgear router firmware update process. Might be, you are missing some steps, resulting in the issue. Follow the steps highlighted below in exact given order to update Netgear router’s firmware. Keep reading!
- Connect your Netgear router to the modem using an Ethernet cable.
- Power up your PC or laptop and navigate to the official site of Netgear.
- Enter your Netgear router’s Model Number carefully.
- Click on Downloads.
- Select a firmware version for your Netgear router and click on Download.
- Launch a web browser of your choice
- Enter 192.168.0.1 or 192.168.1.254 IP in the browser’s address bar.
- Press the Enter key.
- Now, the router login page will display.
- Enter the default Netgear router password and username and click on Log In. To avoid login issues, ensure to use the correct router login username and password.
- Select ADVANCED option and thereafter click on Administration.
- Then, click on Firmware Update and select the Upload button.
This way, the firmware of your Netgear router will successfully get updated.
Note: Once you hit the Upload button, do not try to go online or turn off your router.
In the event that you have followed the Netgear router firmware update steps in exact given order and the problem still persists, then the issue might be hardware-related. In that case, walk through the steps outlined underneath:
Fix: Netgear Router Firmware Update Stuck Issue
Fix 1: The device (computer or laptop) you are using must be up-to-date and well connected to your router’s WiFi.
Fix 2: The power adapter of your Netgear router must be inserted properly into a working wall outlet.
Fix 3: Clear the browsing history before having access to the router login page using 192.168.0.1 or 192.168.1.254 IP.
Fix 4: Restart your PC. Close all the unwanted tabs as well.
Fix 5: Cross-check the default Netgear router IP address after entering it.
Fix 6: Last but not the least, power cycle your Netgear router. Sometimes, a simple reboot or restart is enough to fix various Netgear router issues. If you haven’t yet restarted or power cycled your Netgear router, then it’s time to do so.
To power cycle your Netgear router, follow the instructions highlighted below:
- First and foremost, disconnect your currently connected modem, PC, laptop or smart phone from your Netgear router.
- Unplug it from the power outlet.
- After sometime, plug your Netgear router back in to a wall outlet.
- Connect your WiFi-enabled devices to the available WiFi and check whether the firmware update issue is fixed or not.
If the problem is still spinning your head, get in touch with technical experts for help.