If we ever look around, we will discover that electrical wire is the backbone of our modern society. Everywhere where our eyes can reach is surrounded or incorporated with wires. There are wires to switch on lights, AC, TV, oven, refrigerator, and even while talking on the phone in the office. It is very much obvious that without the proper connection of nothing will work. An improper or faulty connection can possibly damage any device or damage your home/office. The best solution to avoid unfortunate events is proper crimping using a quality cable crimping tool.
This small handy tool plays a vital role in providing a high connection between terminals. Proper crimping is very much essential when working with cables in any industry or DIY projects. Poor connection or crimping will result in failure of connection and fatal consequences. That’s why this article is crafted with a few crimping tips to guide everyone in the right direction.
Tip 1: Prep the wires
The first thing to keep in mind while using a crimper is not to hustle as soon as you have wires in hands. Before you start with crimping, make sure you select the right wire gauge for your purpose and strip a specific length of insulation from that specific wire. Both the insulation that you will strip and the wire must be cut perpendicular to the wire’s longitudinal axis. All the wires strands must be approximate of the same length, without any excessive damage. This is the first right step that should not be overlooked.
Tip 2: Skip the pilers
Remember, pilers are not crimpers. Crimpers are specially designed to connect terminals or deform the wire insulation for strongly connecting the terminals. When you opt for this handy tool, never skimp on the quality. Quality industrial tools like crimpers will ensure a strong and secure connection. High-quality crimpers have the potential to keep the connection strong, and not open it until the extreme outer force is applied. Use the right tool and get the job done easily.
Tip 3: Avoid over crimping
Yes, this is very obvious. Over crimping is possible if we do not work with minuscule attention. Mostly this happens when we use hand-held tools. It is better to pay attention and only crimp necessary. Over crimping will result in excessive extrusions. It can reduce the circular area of a conductor and result in an increase in resistance. Adjusting crimp to a specific height and specification should resolve such issues.
Tip 4: Inspect the crimp visually
Visually inspecting the crimped wire will help you find any defects. You can use eye loupe to find most defects like pierced insulation, absence of bell mouth, excessive or no cut-off tab, short or no conductor brush, and insulation under the crimped conductor. You can examine all the small details using a high-quality eye loupe.
Tip 5: Test wires regularly
You are not doing right if you don’t keep checking what is done. The last and the necessary step is to keep checking the connection for a smooth crimping process. Network cable tester and other testing devices are available in the market to check and verify whether the connection is working perfectly or is there any kind of defect which needs to be resolved.
Conclusion!
Achieving a quality crimp connection demand practice and skills. It requires detail attention, and most importantly, it demands a top-notch quality industrial tool that ensures performance. Eclipse – total eclipse 4 you, is one such premium company providing the highest quality industrial tools and products. Therefore, for a secure, reliable, strong, and precise connection we can always rely on Eclipse.