Is your Netgear Nighthawk WiFi router not working? Are there any connectivity issues? Is the device showing connected but still you are unable to access the internet? If the answer to above questions is in big YES, then you are at the right blog. Here, in this post, you will get to know all the things about fixing Netgear Nighthawk router issues.
Just perform the below-given Netgear router troubleshooting tips and fix the issue on your own. Let’s start!
Steps to Fix Netgear Nighthawk WiFi Router Issues
Placement of the Device
The very first step to fix Netgear router issues is its placement. You have to make sure that after unboxing, you have placed the device at the middle of your house. Also, try placing the device away from Bluetooth devices and interference-creating WiFi devices.
Continuous Power Supply Is Must
The second step to fix the issue is to provide your router a fluctuation-free and continuous power supply. For this, you have to ensure that the device is plugged in properly into a damaged-free socket.
Are the LED Lights Visible?
This would be the main issue that need not to be ignored. Some users don’t pay attention towards the LEDs on the device. If your Netgear Nighthawk router is connected and you are not receiving the desired internet speed, then have a look at the LEDs of the device. Are they stable? If not, then turn off the router, wait for a few minutes and turn it back on again. The LEDs might take a couple of minutes to become stable.
Is the Connection Successful?
Are you sure that the device you are using is connected properly with the router’s WiFi network? Chances are, anybody in your house has turned on the public WiFi and you are connected to that network. So, how to resolve the issue? Simply turned off the public WiFi and make sure that you are connected to your own.
If you are using a wired device, then ensure that a solid connection is made between your router and the device using an Ethernet cable.
Reset Might Be a Better Option
Performing a proper reset process might help you fix login to nighthawk router issues. You also have to make sure that all the connections you have made with your Nighthawk router are removed during the process. Follow the steps below to reset the device in a proper manner:
- Plug the device into a working wall outlet.
- Make sure that the LEDs on your Netgear Nighthawk router are stable.
- Then, locate the reset hole on your Nighthawk router.
- After that, grab a paper clip, pin, or any thin object.
- Insert the object into the reset hole of your router and hold it for a moment.
- The power LED will blink. This indicates that your router has successfully been reset.
You can now configure it by following the setup steps given below.
Set up the Negear Nighthawk Router
Note: During the Netgear router setup process, all the LEDs on it must be stable.
- Grab an Ethernet cable and connect your router to the existing modem.
- Then, turn on a PC, laptop, tablet, iPhone, or iPad and launch an internet browser on it.
- Once the browser loads up successfully, head towards its address bar and type routerlogin.net.
- Hit the Enter key or click on OK.
- www.routerlogin.net login page opens up on the screen.
- Enter the default admin details. In case you have changed the details, then use them instead. Oops! Forgot the admin credentials? Don’t worry as the reset process will work out to fix the issue.
- Afterward, Netgear router login screen will appear.
- Follow the instructions and complete the Netgear Nighthawk setup process.
If you find any difficulty in performing the Netgear router troubleshooting steps then without any delay, get in contact with our technical experts.