You will need to arrange the roofing safety rail rental. There are safety regulations that govern height work.
There are different legal requirements for roofing safety rails in Australia. This explanation explains the Victorian roof guardrail regulations. It will help you ensure that your workers are safe as they complete their roofing projects.
What Are Roofing Safety Guards?
Passive fall prevention is what roofing safety rails are. They are metal railing that surrounds your roof construction site. They can be used to reduce the chance of your staff falling while they are working at elevated heights. Passive safety devices are those that can be left in place and don’t require any modifications.
What Are The Best Times To Use Safety Rails?
Safety rails, safety mesh, perimeter screens, and scaffolding are some of the most common fall prevention devices found on work sites. Fall prevention devices should be used if your staff is working at heights greater than 2 meters. The job description and fall hazards will determine the best fall prevention method.
Roof safety rails are sometimes required in certain circumstances, like:
- Your employees should not be within two meters of the edge of a roof.
- In wet and windy conditions
- Protrusions and obstructions that pose a risk of tripping
Is There Any Specific Information Regarding The Type Of Guardrails?
The type of roofing safety rail that you require to be hired will depend on your specific work conditions. When deciding on the type of safety rail to use, you must consider the material and the pitch of your roof. Many regulations differ for metal, concrete, and tile roofs. Also, flat roofs versus pitched roofs.
These are the general requirements for roofing safety rails.
- Toeboards and mesh infill should be included in the safety railing. This will prevent tools and debris from falling off the roof, posing a risk to anyone working or walking below. This exception is only if your roof slope is less than 15 degrees.
- A third rail must be provided where there is no mesh or toeboard.
- You must have an additional mid-rail to complete your safety railing setup.
- The railings should not be more than 450mm apart.
- Safety rails must be strong enough to withstand the force of someone falling on them.
- The top rails should be at least 900mm to 1100mm above the surface.
Safety rails are not recommended for roofs that have a slope of more than 35 degrees. The roof will be deemed unsafe to stand on or work on.
Safety guard railings are required on new construction sites and in homes than on projects with existing roofs.
Before you start any roof work, ensure that your setup and fall prevention practices comply with Australian Standards and Industry Codes.
How To Arrange OH&S Compliant Roofing Safety Rail Rental
You’re planning to start a roofing project like solar panel installation, second-story renovations, or roof cleaning. To get started, arrange roofing safety rail hire. You should ensure that your roof safety rail have been installed by qualified professionals. You can rest assured that your rails will be safe and that your workers are protected.
Australian scaffolds can install and remove roofing safety rails on your property. Renting safety rails for roofs in Sydney will ensure that your workers can do their job safely and securely. To ensure regulatory compliance, we use only high-quality equipment. Australian scaffolds is known for its prompt delivery and quick set-up on your site at an affordable price.