Ways To Ensure Proper Maintenance Of Tyres

Tyres

Car maintenance is an important task, but maintaining only the car’s body and the engine does not count as maintenance. In other words, to have complete maintenance, you need to maintain tyres as well. In today’s lifestyle, we only take care of the car’s exterior and neglect the components like tyres, which also need to be treated. Tyres are the only part that comes in direct contact with the road while driving; thus, they get damaged first and require extra care and precaution.

Here are a few things which one must consider to ensure proper maintenance of tyres.

Tyre Pressure
Tyre pressure is one of the major causes of car accidents. A large number of car accidents are recorded due to under-inflated tyres. Maintaining an accurate tyre pressure not only prevents car accidents but also eases car handling.

Regular tyre pressure check lowers the risk of punctures and also helps in maintaining good mileage. Always measure the pressure of the Pirelli Tyres Birmingham when it is cold. To measure tyre pressure, always use a genuine pressure gauge. Also, inspect the tyre pressure before the start of the journey. Refer to the user manual of your car for the optimal range of tyre pressure.

Tyre Alignment
Correct tyre alignment is necessary to maintain the balance of the car. If your car is imbalanced, then you must adjust the alignment. Increased fuel consumption is also a sign that the car requires tyre alignment. Apart from these, other signs of the need for tyre alignment are uneven tread wear, steering wheel vibration, and the car pulling left or right.

Checking tyre alignment from time to time will minimise the risk of accident and ensure a car’s long life. It is advised to check and maintain ,the tyre alignment after every 7,000 miles. The main goal of a tyre alignment is to distribute the weight of the car on each wheel equally.

Storing Tyres
The conditions of tyres depend on the place and the way they are stored. Always store your Budget Tyres Birmingham in a cool and dry place. The storing facility should not have heating pipes, steam engines, or any kind of heat-generating equipment. Prolonged exposure to water or humidity also shortens the tyre’s life.

You should clean the tyres thoroughly before storing them. Never apply any kind of coating or gloss on tyres before storing. After cleaning the tyres, pack them in a bag and store them in a cool/dry place. Always store tyres away from chemical compounds and lubricants.

Checking Treads
Treads are the rubber grooves on the tyres which provide the grip on the roads. New tyres have treads of around 8 mm deep, but as the car runs, this tread wears, making it difficult to provide grip on the road.

Treads of tyres should be checked regularly, and if the depth of treads is less than 3 mm, the tyre should be changed. You can estimate the depth of your tyre tread with a coin by placing it in the groove. If the head of the coin is visible, then you need to change the tyre. This will help in stabilising the grip, which will give a smooth driving experience.

Sensible Driving
The most common reason for the tyres to get damaged is rash driving. People drive at very high speeds, and to avoid accidents, apply hard brakes; even if your vehicle stops, this whole process puts a strain on the tyre, which results in their damage. Applying hard brakes generates friction which corrodes the tyre and thus shortens its lifespan.

Therefore, you must drive sensibly, at normal speed and apply brakes slowly. This will increase the life of tyres and will also prevent accidents due to rash and negligent driving.